Very cheap ABS plastic raw material

ABS is an engineering plastic that is A copolymer of three monomers: acrylonitrile (A), butadiene (B) and styrene (S). Abs Material has good strength, toughness and impact resistance, so it is widely used in automobile manufacturing, electronic products and other fields. Polypropylene

From the point of view of robustness, the strength and hardness of ABS materials are high, and they can withstand a certain impact force and pressure, so they can meet the requirements of robustness in many applications. However, the tensile strength of ABS is relatively low, so other materials may need to be selected in cases where a large tensile force is required. In general, ABS, as a commonly used engineering plastic, can meet the needs of strong in most cases What are the characteristics of abs sheet?    Polyformaldehyde

1, abs sheet has excellent mechanical properties, its impact strength is very good, can be used at very low temperatures :abs has excellent wear resistance, good dimensional stability, and oil resistance can be used for bearings under moderate load and speed. The creep resistance of abs is greater than PSF and PC, but smaller than PA and POM. The bending strength and compressive strength of abs are poor among plastics. The mechanical properties of abs are greatly affected by temperature.PC Or ABS 

2, abs plate is not affected by water, inorganic salts, alkali and a variety of acids, but soluble in ketones, aldehydes and chlorinated hydrocarbons, by ice acetic acid, vegetable oil and other erosion will produce stress cracking. The weather resistance of abs is poor, and it is easy to degrade under the action of ultraviolet light: after six months in the outdoors, the impact strength is reduced by half. abs sheet has excellent impact strength, good dimensional stability, dyeing, molding and mechanical processing, high mechanical strength, high stiffness, low water absorption, good corrosion resistance, simple connection, non-toxic and tasteless, with excellent chemical properties and electrical insulation properties. It can resist heat without deformation and has high impact toughness under low temperature conditions. It is also a material that is hard, not easy to scratch, not easy to deform. Low water absorption; High dimensional stability. Conventional abs board is not very white, but the toughness is very good, you can use a shearing machine to cut, you can also open the mold.

4, the thermal deformation temperature of abs sheet is 93~118 ° C, and the product can be increased by about 10 ° C after annealing. abs can still show a certain toughness at -40 ° C and can be used in the temperature range of -40~100 ° C. Among them, the transparency of transparent abs board is very good, and the polishing effect is excellent. It is the preferred material to replace PC board. Compared with acrylic, its toughness is very good, which can meet the meticulous addition of products  Pc Or Abs